FANUC has introduced the R-50iA Compact DC Controller, a DC-powered controller designed to simplify the integration of CRX collaborative robots with autonomous mobile robots (AMRs) and automated guided vehicles (AGVs).
Unlike conventional robot controller configurations that require AC power, this model accepts direct DC input from a mobile platform's battery system. The design helps reduce additional power-conversion equipment, wiring and installation space.
For manufacturers developing mobile robotic workstations, this is an important step toward more flexible automation.
The key feature is its DC power input. The controller supports 24–48 V DC, allowing it to operate with battery-powered mobile platforms.
In conventional mobile robot installations, integrating an AC-powered robot controller can require additional power-conversion equipment. The R-50iA Compact DC helps simplify this arrangement by accepting DC power directly.
Its compact enclosure also makes it easier to install within space-constrained mobile robot systems.
| Parameter | R-50iA Compact DC |
|---|---|
| Controller Type | DC Robot Controller |
| Input Power | 24–48 V DC |
| Power Capacity | 1.2 kW |
| Weight | Approx. 9 kg |
| Dimensions (W × D × H) | 440 × 280 × 99 mm |
| Protection Rating | IP20 |
| Robot Compatibility | CRX-10iA and CRX-20iA models specified by FANUC |
| Main Application | AMR and AGV-mounted collaborative robots |
Compatibility note: FANUC's published documentation specifies the Compact DC controller for the CRX-10iA and CRX-20iA configurations. Buyers should confirm the exact robot model and system configuration before ordering.
A mobile robot needs to manage its available battery capacity, installation space and electrical connections. Adding a conventional robot controller can increase system complexity.
The R-50iA Compact DC addresses several of these challenges:
Direct DC input: Connects to compatible mobile platform battery systems without requiring a separate AC inverter for the controller.
Compact installation: Its 9 kg weight and low-profile enclosure help accommodate limited mounting space.
Reduced wiring complexity: Interfaces designed for mobile-platform installation help simplify system integration.
Flexible deployment: Supports robotic operations at different workstations without requiring a permanently installed robot cell.
The controller retains the core control capabilities and expandability of the R-50iA platform, including interfaces for industrial networks, sensors and safety devices.
The R-50iA Compact DC is designed for mobile collaborative robot applications, including:
Mobile machine tending
A CRX robot mounted on an AMR can travel between machines and perform loading and unloading tasks at different stations.
Intralogistics and parts supply
Mobile robotic systems can transport components and perform handling operations closer to production lines.
Mobile inspection
A collaborative robot mounted on an autonomous platform can support inspection tasks across multiple work areas.
Flexible manufacturing
For factories with frequently changing layouts or high-mix production, mobile robot systems can reduce dependence on fixed automation stations.
The controller is not a universal replacement for every R-50iA configuration. Several factors should be checked during project planning:
Robot compatibility: Confirm that the selected CRX model is supported.
Battery system: Verify that the mobile platform provides a suitable 24–48 V DC supply and sufficient power capacity.
Installation space: Check the controller's dimensions, mounting arrangement and ventilation requirements.
Payload and stability: Evaluate the combined weight of the robot, controller, end-of-arm tooling and workpiece.
Safety integration: Assess emergency stops, safety devices, communication interfaces and mobile-platform operating conditions.
These details should be reviewed together with the AMR supplier and robot system integrator before finalizing the design.
The FANUC R-50iA Compact DC Controller is designed to make mobile collaborative robot systems easier to build. Its direct DC power input, compact enclosure and reduced need for additional power-conversion equipment address several practical challenges in AMR and AGV integration.
For manufacturers planning mobile machine tending, parts handling or flexible production systems, it provides a dedicated controller option for compatible FANUC CRX robots.
FANUC announced the controller in October 2026, with shipments scheduled to start in November 2026.
FANUC has introduced the R-50iA Compact DC Controller, a DC-powered controller designed to simplify the integration of CRX collaborative robots with autonomous mobile robots (AMRs) and automated guided vehicles (AGVs).
Unlike conventional robot controller configurations that require AC power, this model accepts direct DC input from a mobile platform's battery system. The design helps reduce additional power-conversion equipment, wiring and installation space.
For manufacturers developing mobile robotic workstations, this is an important step toward more flexible automation.
The key feature is its DC power input. The controller supports 24–48 V DC, allowing it to operate with battery-powered mobile platforms.
In conventional mobile robot installations, integrating an AC-powered robot controller can require additional power-conversion equipment. The R-50iA Compact DC helps simplify this arrangement by accepting DC power directly.
Its compact enclosure also makes it easier to install within space-constrained mobile robot systems.
| Parameter | R-50iA Compact DC |
|---|---|
| Controller Type | DC Robot Controller |
| Input Power | 24–48 V DC |
| Power Capacity | 1.2 kW |
| Weight | Approx. 9 kg |
| Dimensions (W × D × H) | 440 × 280 × 99 mm |
| Protection Rating | IP20 |
| Robot Compatibility | CRX-10iA and CRX-20iA models specified by FANUC |
| Main Application | AMR and AGV-mounted collaborative robots |
Compatibility note: FANUC's published documentation specifies the Compact DC controller for the CRX-10iA and CRX-20iA configurations. Buyers should confirm the exact robot model and system configuration before ordering.
A mobile robot needs to manage its available battery capacity, installation space and electrical connections. Adding a conventional robot controller can increase system complexity.
The R-50iA Compact DC addresses several of these challenges:
Direct DC input: Connects to compatible mobile platform battery systems without requiring a separate AC inverter for the controller.
Compact installation: Its 9 kg weight and low-profile enclosure help accommodate limited mounting space.
Reduced wiring complexity: Interfaces designed for mobile-platform installation help simplify system integration.
Flexible deployment: Supports robotic operations at different workstations without requiring a permanently installed robot cell.
The controller retains the core control capabilities and expandability of the R-50iA platform, including interfaces for industrial networks, sensors and safety devices.
The R-50iA Compact DC is designed for mobile collaborative robot applications, including:
Mobile machine tending
A CRX robot mounted on an AMR can travel between machines and perform loading and unloading tasks at different stations.
Intralogistics and parts supply
Mobile robotic systems can transport components and perform handling operations closer to production lines.
Mobile inspection
A collaborative robot mounted on an autonomous platform can support inspection tasks across multiple work areas.
Flexible manufacturing
For factories with frequently changing layouts or high-mix production, mobile robot systems can reduce dependence on fixed automation stations.
The controller is not a universal replacement for every R-50iA configuration. Several factors should be checked during project planning:
Robot compatibility: Confirm that the selected CRX model is supported.
Battery system: Verify that the mobile platform provides a suitable 24–48 V DC supply and sufficient power capacity.
Installation space: Check the controller's dimensions, mounting arrangement and ventilation requirements.
Payload and stability: Evaluate the combined weight of the robot, controller, end-of-arm tooling and workpiece.
Safety integration: Assess emergency stops, safety devices, communication interfaces and mobile-platform operating conditions.
These details should be reviewed together with the AMR supplier and robot system integrator before finalizing the design.
The FANUC R-50iA Compact DC Controller is designed to make mobile collaborative robot systems easier to build. Its direct DC power input, compact enclosure and reduced need for additional power-conversion equipment address several practical challenges in AMR and AGV integration.
For manufacturers planning mobile machine tending, parts handling or flexible production systems, it provides a dedicated controller option for compatible FANUC CRX robots.
FANUC announced the controller in October 2026, with shipments scheduled to start in November 2026.